Collarchat.com

Create a
Free Account
As the Collar Turns:
Collarchat.com - BDSM Forum

Home  Login  Search 
Espanol  Deutsch  Francais  Italiano  Portugues 

P.V.C pipe's (plumbing)


View related threads: (in this forum | in all forums)

Logged in as: Guest
 
All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> P.V.C pipe's (plumbing) Page: [1]
Login
Message << Older Topic   Newer Topic >>
P.V.C pipe's (plumbing) - 10/24/2008 7:14:56 PM   
frenchdungeon


Posts: 85
Joined: 2/11/2008
Status: offline
does anyone here use pvc pipe's to build, various projects

i built a bdsm chair/bench i use to strap in my sub, also use it for medical play

i would love to hear, what you have come up with
Profile   Post #: 1
RE: P.V.C pipe's (plumbing) - 10/25/2008 1:17:50 AM   
Irishm57


Posts: 222
Joined: 11/27/2005
Status: offline
The first cage i made was 1 inch pvc with 3/4 inch wood dowels inserted inside the tubes to give it some strength. If the joints are preped right they don't pull apart easily. And with the 3/4 inch dowel in the tubes , the vertical runs didn't have much bend at all. not to mention it made an interesting rattle when shaken.



_____________________________

Some of the toys I have made can be seen at
http://www.slavechris.net

(in reply to frenchdungeon)
Profile   Post #: 2
RE: P.V.C pipe's (plumbing) - 10/26/2008 5:42:04 PM   
RoughFN


Posts: 197
Joined: 7/26/2006
Status: offline
Perhaps it doesn't show that much originality, but I'm quite proud of using PVC pipe in my shower stall. Here are some pictures: http://tinyurl.com/4dkdyu

If I can figure out a way to reenforce them a bit more for extra rigidity, I plan on building a few more things. Stockade is first on my list.

I like the idea of sliding dowels inside the pipe, but I don't want the rattling. I wonder if it'd be possible to fill up the space with Great Stuff to take care of the gaps and stop it from shaking.

(in reply to Irishm57)
Profile   Post #: 3
PVC bondage - 10/27/2008 5:56:05 AM   
MasterKeeps


Posts: 16
Joined: 9/20/2008
Status: offline
I've for years wanted to do a public scene, strolling out onto the floor in coveralls with sub. Position her on the floor and gradually build a PVC cage around her, using PCV to weld up impromptu restraints.... never got to it though.

(in reply to RoughFN)
Profile   Post #: 4
RE: PVC bondage - 10/27/2008 8:54:13 AM   
janey120


Posts: 2
Joined: 8/27/2008
Status: offline
Hi all

I've used short lengths of 1.1/4 (32mm) and 1.1/2 (40mm) pvc tube, suitably smoothed at the ends, as ball stretchers, push the balls through one at a time and once they are both through they stay there, the longer the tube, the shinier the scrotum :)

(in reply to MasterKeeps)
Profile   Post #: 5
RE: PVC bondage - 10/26/2010 11:20:29 AM   
Arturas


Posts: 2868
Status: offline
quote:

ORIGINAL: MasterKeeps

I've for years wanted to do a public scene, strolling out onto the floor in coveralls with sub. Position her on the floor and gradually build a PVC cage around her, using PCV to weld up impromptu restraints.... never got to it though.



Cold. Hard. Steel.

I took her to the local lifestyle club. The Mark by CPI in Nashville; one fully equipped with a steel barred cage, each side four feet of 1/2 inch square welded steel bars. She was helpless and could feel the cold steel in her hands as I bound her hands to the far cage wall. I left her legs free but grabbed a handfull and very slowly, very gently lowered her lips to tast her steel prison. She could only watch as her lips tasted her new life; it's a dungeon; dark, the steel bars cast dark shadows every bit as cold as the bars themselves on her lovely skin as she awaits the pleasure of her evil jailer. I am unseen behind her, my rough hands touching her as I please. She is powerless. I and the steel cage are power. Goose bumps spread about her nude figure as she falls into the scene and subtly spreads her high heels legs...


Arturas




< Message edited by Arturas -- 10/26/2010 11:27:01 AM >

(in reply to MasterKeeps)
Profile   Post #: 6
RE: PVC bondage - 10/26/2010 8:15:15 PM   
thatsub


Posts: 176
Joined: 5/3/2010
Status: offline
I used PVC pipes to build different spreader bars. A very easy thing to do.

_____________________________

Wise men talk because they have something to say; fools, because they have to say something. Plato

Confucius say: To make a long story short, don't tell it.

(in reply to Arturas)
Profile   Post #: 7
RE: PVC bondage - 1/31/2011 10:12:51 AM   
bxd5687


Posts: 1
Joined: 6/8/2009
Status: offline
I made a pvc cock cage (ala cbt2000). I wear it under my clothes with a butt plug inserted. It is great, I still have and use it from time to time. I love being told to wear it when meeting someone for the first time.

< Message edited by bxd5687 -- 1/31/2011 10:13:35 AM >

(in reply to thatsub)
Profile   Post #: 8
RE: PVC bondage - 2/1/2011 2:34:48 PM   
BlackDom317


Posts: 2
Joined: 2/1/2011
Status: offline
I use a lot of PVC in my "furniture" making. For increased rigidity try insulation foam. The kind that comes in a spray can and expands.

(in reply to bxd5687)
Profile   Post #: 9
Page:   [1]
All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> P.V.C pipe's (plumbing) Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Collarchat.com © 2014
Collarchat.com is a member of the Free Speech Coalition
Terms of Service Privacy Policy Spam Policy

0.109