WinsomeDefiance
Posts: 6719
Joined: 8/7/2007 Status: offline
|
quote:
ORIGINAL: mnottertail quote:
ORIGINAL: WinsomeDefiance My .22 handgun has been failing to chamber and sometimes jamming. It should hold 8 rounds, but I found I didn't have any problems chambering and firing when I loaded only 7 rounds into the clip Then six. Now, I have issues if I load more than 5 rounds. I think ordering a new magazine clip ( or 2) for it might help. I could take it in for service, but ordering a new clip would be a cheaper first step. Any ideas what else it could be? I like the gun, and I've become comfortable firing it and prefer it over my .380. I just don't see any use for a gun that I can't rely on. So, any advice from those of you who have experience with this issue? What brand of ammo? I would mic it. 99.9999999999% of that stuff is bad ammo. look, you may need a light and a magnifier, do you have lead build up anywhere certain place? do you see brass shavings anywhere. load your mag, thumb them out on the bed, any difference between 9 and 5? harder to push anything, scraping noises? look up the void with a flashlight as well. the blowback and push to lock on a 22 isnt that much, you check for dents on your mag, even small ones, whether the loading end is worn or bent, look how it fits in the gun does it rattle in there? how many rounds been thru it? when if fails to chamber is the bullet moved? hung up? not moved at all? check the lips on the round as well, the spring doesnt get a hard workout, is the mag lock worn or does it still snap? if you work the mech by hand does it never fail? That's a lot of homework. Thanks for the input, I'm taking notes and will check on all the above. It's all a bit friendlier than I thought I'd ever be getting with a gun, so I might have to buy it dinner first.
|