|
Termyn8or -> RE: Cheap and effective chastity belts (9/4/2007 11:21:09 AM)
|
I own a DD belt, and I'll tell you this, I am not all that impressed by it. I will say this, for the money it is alright. DD themselves sold them for about 00 USD, which is dirt cheap compared to the major players.
I screwed up the measurements on mine and can't wear it, but even if I could it seems to me the elbow on the tube would cause me big problems. That is basic to the design of the belt so I decided to forego having it resized. It is now going to become something else.
I really like the lock, I suppose you could rip the shroud off an get out with a pair of pliers, I think. But it is pickproof. You've seen the ket so you know what I mean, but then I have figured out how to make a master key for them.
They need to improve on the brass rivets, get into stainless or something. Then they price would be higher, but they should be able to stay well under the norm.
If you want cheap, get Waterhole's CB, they are much flatter. They are plastic, but detection is the key to this, ANYTHING can be cut, even stainless.
My Waterhole broke, eventually I will send it back, but I had to make a curved tube for it. But that is all under. With Waterholes your girls will have a nice flat shape down there. Two locks are required, but you can use the numbered seals which are airport friendly. Wearing anything like this, tell them to get their ass in the tub. Unless you want to clean them, they need to soak.
At a hundred bucks apiece you can lock up many more. What is that about 50 pounds ?
Also there is lockedinsteel. If you have some CB3000s around, you might want to look into their support belt for it. Of course it locks, and it prevents pullout. They are a bit over 200 USD, and are available in an ergo model. Along with a stainless lockpin for the 3000, it is fairly secure. I intend to correspong with Jillian, the owner of LIS about a shackle guard for the lock and pin, which should bring it's security level close to that of a Neosteel or other full florentine CB.
Since you are in the UK, you actually have another option. Susan Lund, who frewuents the LMU discussion forum is also in the UK. Because she WANTS to make CBs, she could some up with some nice designs for you I bet, and she is fully aware of the TV/TS issues. I am going to type this URL from memory now, sorry if it doesn't work, but I'll try.
http://members.aol.com/zzyzzwicky2/MaleChastityBelts.htm
I'll test it a bit later, and if it doesn't work I'll fix it. If you can see it, pay attention to what she calls the M1. This thing has gotten me hot, the reason ? It is locked with a four dial combination lock, and the wearer could concievably go through all the combinations and eventuall get out, except for one thing. The lock is in the back and the wearer can't see it. This means that even with the combination, the wearer needs assistance to get out.
That URL might be
http://members.aol.com/zzyzzwicky2/Male_Chastity_Belts.htm
One of those should work. She makes them flat for the specific purpose you mentioned. I will beckon her on the other forum and invite her to this one a bit later. If you hook up, great, she loves making CBs, it's pretty much her main hobby. And she is pretty good at it, if you get that page you'll see that she has done alot of experimentation. She probably could run a CB factory, but it seems she does not want to at this time. But then if you are looking for like six or seven CBs, you might strike up a deal.
Backatcha later. Lemme know if one of those URLs work. I think there is an email link, but it is not likely to be current. You can try it though, but it might be better if I prepare her for it. We have corresponded and I get the idea she is somewhat like me, who detests incoming communication out of the blue. In fact I'll tell her to turn off her spam filters, once you have her email. Her email is in the throcom domain, I have no idea how they filter what, also what I use might be a totally unfiltered email, and the one on her page might not be the same, or even valid.
We have discussed design and all that pretty extensively, and I'll say this, DDM might be a decent buy, but I think Susan could do better at or near the same price. The way I see it it is a labor of love (???) for her, and I doubt she has ever collected money for a CB, but she does seem to be proficient at making them. I think she has a stable as well.
I think the best way to approach her would be "Would you like a bunch of new subjects to experiment on ?" Rather than "Would you like to make some extra money ?". Money ? I'm sure she is out of pocket for the material, cutting bits etc., it is only right that you pay her, but I don't think sher'll gouge you. I think she really wants to do it, for her, it's not the money.
As such, you might get a good deal and she will enjoy running a military style examination, get all those girls in a line, and make sure Susan has her pad and pen. Measure them up, and then go to work. She might make a profit, but I don't think that is her main goal.
I'm going now to the LMU forum, I will invite her here, she may bite, or not.
T
|
|
|
|
