shock collar modified for balls (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel



Message

MistressMiracle -> shock collar modified for balls (3/29/2008 6:13:04 AM)

Does anyone know of instructions, or a site, that details how to modify a doggie shock collar to be worn on a slave's balls?  I have done a few searches, and not come up with the info I seek.  Thank you



MsStarlett -> RE: shock collar modified for balls (3/29/2008 6:26:53 AM)

Depends on the slave.  How much can he take?  I've got a little yappy dog collar... doesn't give as strong a shock as the larger ones.  Just shorten the strap.  Put the prongs behind his nuts and wrap all the way around the sack and the base of the penis.  Order him to 'Bark like a dog' then sit back and giggle.  Half the fun is finding out exactly which sounds will give him a jolt.



Just read/answered a thread in the "Ask A Master" section about photos of toys in your profile pics.  My shock collar is shown hanging from my shoe in one of mine.  The shoes were a gift from one of my favorites and the collar is a special 'treat' for another.



MsSaskia -> RE: shock collar modified for balls (3/29/2008 11:47:12 AM)

The prongs that come with all the collars I've seen are designed to go through dog fur to touch skin.  They're a bit too pointy for delicate human scrotal skin, and tend to abrade, which draws fluid from the body, which draws current from the unit, which leads to nasty burns.  I haven't gotten around to modifying mine yet, but I'm told that if you replace the prongs (they unscrew very easily) with acorn nuts, that'll mitigate the abrasion issue. 

I also got a woven nylon cat collar to use instead of the larger dog collar.  Much better fit.  ; )



azropedntied -> RE: shock collar modified for balls (3/29/2008 12:22:20 PM)

why do i suddenly have  the desire to bark is beyond me [:)]
NO NO bad dog !



stef -> RE: shock collar modified for balls (3/29/2008 3:32:24 PM)

quote:

ORIGINAL: MistressMiracle

Does anyone know of instructions, or a site, that details how to modify a doggie shock collar to be worn on a slave's balls?  I have done a few searches, and not come up with the info I seek.  Thank you

There was a thread a while back where a user posted a photo of a device they made, let me see if I can find lt...

Here it is.  They didn't post instructions, but it should be pretty clear what they did from the photo and you could always email them for more info.

~stef



wewalkamongyu -> RE: shock collar modified for balls (3/29/2008 4:41:24 PM)

I have done it.  we used a remote control collar that was adjustable with 7 shock settings.
we kept it on the lowest setting. The anticipation with her thumb circling the button was as bad as the actual shock.  It is a great head game. The one thing I found out is that when you sweat,  the shock gets worse!  lol



Irishm57 -> RE: shock collar modified for balls (3/30/2008 4:21:15 AM)

I have found that having one shock point on the penis and the other behind the ballsack is more intense. And in reading Ms Saskia's post, one could easliy take a metal key ring , attach a wire with a stakon ring connector on the end and put it under one of the acorn nuts. The shock would then also include the penis. A pic of what i mention can been seen at http://www.slavechris.com/cring.jpg






MistressMiracle -> RE: shock collar modified for balls (3/30/2008 5:33:09 AM)

thank you all for your suggestions and photos.  I do appreciate it. 



Irishm57 -> RE: shock collar modified for balls (3/30/2008 7:50:27 AM)

quote:

ORIGINAL: Irishm57

I have found that having one shock point on the penis and the other behind the ballsack is more intense. And in reading Ms Saskia's post, one could easliy take a metal key ring , attach a wire with a stakon ring connector on the end and put it under one of the acorn nuts. The shock would then also include the penis. A pic of what i mention can been seen at http://www.slavechris.com/cring.jpg





I  hate clutering posts with after thoughts, forgive me. So carrying on what i posted , under the other acorn nut attach another wire and stakon to one of these copper wall stubs from home depot , and insert.
http://www.slavechris.com/wallstub.jpg






Crush -> RE: shock collar modified for balls (3/30/2008 8:16:54 AM)

We modified it as well.  Here is the simple version:

Went to Radio Shack and got a "Antistatic Wrist Strap"  Cut the end off with the resistor in it and now have a nice conductive band for the balls :)

Soldered a nice shiny penny to a piece of wire.  Taped that just south of the head of cock. 
Both wires then went to the shock box, under the two points (they unscrew.)

Wires were long enough so that the box was in a cellphone carrying case on the belt.  Got a cheap one with no plastic cover.

Nice range...100+ ft or more, in bars, shopping, whatever!



SirMIkeSD -> RE: shock collar modified for balls (3/30/2008 11:31:01 AM)

My boy's wear these all the time and bryan has for almost two years.  Just buy the small size, have the prongs positioned to come up under the balls.  LEAVE the extra part of the collar that is where the antena is.

Mike



BootBlackBlast -> RE: shock collar modified for balls (3/30/2008 1:19:23 PM)

It should be said that the doggie remote trainers work better than the anti-barks by the way. I personally like the products by PetSafe for both my human and 4 legged dogs.



kinkypuppy2 -> RE: shock collar modified for balls (3/31/2008 12:11:01 AM)

Should be easy to do.. first you need to replace the "studs" in the collar with some short round heaved philips head screws that will be nearly flush with the unit.
The person who will be wearing it does not have a thick skin of fur.
2nd shorten the collar as needed to fit.

I feel however that using a dog collar especially one with a variable setting and a beep mode attached to the upper thign will do more then adequately.
For the balls use a tens unit and a couple adhesive pads



Page: [1]

Valid CSS!




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy
6.152344E-02