P.V.C pipe's (plumbing)

P.V.C pipe's (plumbing) (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel

Message

frenchdungeon -> P.V.C pipe's (plumbing) (10/24/2008 7:14:56 PM)
does anyone here use pvc pipe's to build, various projects i built a bdsm chair/bench i use to strap in my sub, also use it for medical play i would love to hear, what you have come up with

Irishm57 -> RE: P.V.C pipe's (plumbing) (10/25/2008 1:17:50 AM)
The first cage i made was 1 inch pvc with 3/4 inch wood dowels inserted inside the tubes to give it some strength. If the joints are preped right they don't pull apart easily. And with the 3/4 inch dowel in the tubes , the vertical runs didn't have much bend at all. not to mention it made an interesting rattle when shaken.

RoughFN -> RE: P.V.C pipe's (plumbing) (10/26/2008 5:42:04 PM)
Perhaps it doesn't show that much originality, but I'm quite proud of using PVC pipe in my shower stall. Here are some pictures: http://tinyurl.com/4dkdyu If I can figure out a way to reenforce them a bit more for extra rigidity, I plan on building a few more things. Stockade is first on my list. I like the idea of sliding dowels inside the pipe, but I don't want the rattling. I wonder if it'd be possible to fill up the space with Great Stuff to take care of the gaps and stop it from shaking.

MasterKeeps -> PVC bondage (10/27/2008 5:56:05 AM)
I've for years wanted to do a public scene, strolling out onto the floor in coveralls with sub. Position her on the floor and gradually build a PVC cage around her, using PCV to weld up impromptu restraints.... never got to it though.

janey120 -> RE: PVC bondage (10/27/2008 8:54:13 AM)
Hi all I've used short lengths of 1.1/4 (32mm) and 1.1/2 (40mm) pvc tube, suitably smoothed at the ends, as ball stretchers, push the balls through one at a time and once they are both through they stay there, the longer the tube, the shinier the scrotum :)

Arturas -> RE: PVC bondage (10/26/2010 11:20:29 AM)
quote: ORIGINAL: MasterKeeps I've for years wanted to do a public scene, strolling out onto the floor in coveralls with sub. Position her on the floor and gradually build a PVC cage around her, using PCV to weld up impromptu restraints.... never got to it though. Cold. Hard. Steel. I took her to the local lifestyle club. The Mark by CPI in Nashville; one fully equipped with a steel barred cage, each side four feet of 1/2 inch square welded steel bars. She was helpless and could feel the cold steel in her hands as I bound her hands to the far cage wall. I left her legs free but grabbed a handfull and very slowly, very gently lowered her lips to tast her steel prison. She could only watch as her lips tasted her new life; it's a dungeon; dark, the steel bars cast dark shadows every bit as cold as the bars themselves on her lovely skin as she awaits the pleasure of her evil jailer. I am unseen behind her, my rough hands touching her as I please. She is powerless. I and the steel cage are power. Goose bumps spread about her nude figure as she falls into the scene and subtly spreads her high heels legs... Arturas

thatsub -> RE: PVC bondage (10/26/2010 8:15:15 PM)
I used PVC pipes to build different spreader bars. A very easy thing to do.

bxd5687 -> RE: PVC bondage (1/31/2011 10:12:51 AM)
I made a pvc cock cage (ala cbt2000). I wear it under my clothes with a butt plug inserted. It is great, I still have and use it from time to time. I love being told to wear it when meeting someone for the first time.

BlackDom317 -> RE: PVC bondage (2/1/2011 2:34:48 PM)
I use a lot of PVC in my "furniture" making. For increased rigidity try insulation foam. The kind that comes in a spray can and expands.

Page: [1]

Collarchat.com © 2025

Terms of Service

0.03125