Irishm57
Posts: 222
Joined: 11/27/2005
Status: offline
|
After i made the "stockade" out of blackiron pipe, i thought i make too many things with one purpose. This thought came to me after i was going to finish my wood stocks.
If you don't like my posts on home made toys,, sorry but i am proud of this one.
So i had this off the wall idea , precut pipe is easy for most to work with. So i first made a a black iron pipe frame with 2 purposes. An upright stocks. Then i figured out add a movable bar, and it could be turn to a "forced kneeling" stocks. After i Built that ,, i thought make it portable, or easy to disassemble to hide under the bed or in a closet just add 2 unions. Breaks apart in 3 pieces.
So after i made that, i thought that was dumb, just add a few pipe clamps and threaded eye bolts and you get 4 or 5 or more functions from one restraining device. I thought of 5 the first weekend.. Upright stocks, kneeling stocks, plain upright bondage frame, all fours stocks, and a spanking horse..
Estimated cost depending on your needs and additions is 100 to 130 or more. i am going by the local cost at Home depot. The aluminum for the yoke was 10 bucks alone. So cost will vary.. Parts list for "as shown" in 3/4 inch pipe is listed
The current design as shown is for light to meduim play. for heavier play you need to use 1 inch pipe instread of 3/4 . And of course that increases the cost.
It also doesn't show the corner braces ,, maybe net week i will take pics of it with them but just 4 more pipe plamps, and a foot of pre drilled metal strips.
Oh and if you say , why did i use the tees on the lower legs below the unions, , well when i first was building it i had them left over from the stockade. Why waste when i had it already.. you can omit the tees right below the unions and above the feet. Also i thought i might need to add a length of pipe there to stretch the arms out further for the spanking stock position but i am not sure if that is needed. but it shows how to add a tee or 2 for more extensions.
http://www.slavechris.com/flexistocks/flexistocks.html
< Message edited by Irishm57 -- 5/14/2009 5:44:10 PM >
_____________________________
Some of the toys I have made can be seen at
http://www.slavechris.net
|
Another new home made toy- FlexiStocks - 
Profile
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread