Fucking Machines

Join Our Community

Collarchat.com

Home Login Search

Fucking Machines

View related threads: (in this forum | in all forums)

Logged in as: Guest

All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> Fucking Machines

Page: [1] 2 next > >>

Login

Message

<< Older Topic Newer Topic >>

Fucking Machines - 5/29/2009 9:13:06 PM

Posts: 23
Joined: 3/23/2008
Status: offline

Hi, I've been interested in the fucking machines that continuously pound the receiver until stopped. It seems mostly female sub/slaves use this, but have seen very few male sub/slaves in this. Has anyone ever used a fucking machine during play? If so, please post any experiences you had with them. And for those that are dominant, would you mind sharing how you would utilize this to reward/punish your sub/slave, also with any additional toys and items you wish to use?

RE: Fucking Machines - 5/29/2009 11:20:11 PM

Posts: 5159
Joined: 10/18/2005
From: Montana
Status: offline

I have never had one used on me, but had a g/f who used one. She found it boring, not stimulating at all, and uncomfortable. I do realize that not all fucking machines are equal. Have heard some great things about a Sibian. The one used on my g/f was merely an in and out dildoe type machine.

Over the years I have come to the conclusion that many of those who think using a fucking machine on their submissive would be hot also have this idea that penile stimulation will bring a woman to orgasm. I have read that 80% of females do not orgasm as a result of penile stimulation alone. If a woman will not orgasm using such a machine then the machine is not good for multiple orgasms or even orgasm denial since for most orgasm will not happen.

Perhaps the machine is just use for something like humiliation purposes.

(in reply to goten11756)

RE: Fucking Machines - 5/29/2009 11:34:34 PM

Posts: 23574
Joined: 11/6/2005
From: Northern (yet still part of the South) Virginia
Status: offline

Sybians are AMAZING!!!!!!!!!!!!!!!!!

*THUDS REALLY REALLY HARD*

_____________________________

Founding Member, Clan of the Scarlet O'Hair-a's

Do not challenge me to a battle of wits & come to fight unarmed.

Are you really that stupid? ~ Bless your heart

13th doughnut

(in reply to peppermint)

RE: Fucking Machines - 5/30/2009 1:06:24 AM

Posts: 379
Joined: 8/4/2005
Status: offline

i have tried a couple, they are very fun

(in reply to Daddysredhead)

RE: Fucking Machines - 5/30/2009 12:38:04 PM

onlyfreelycaged

Posts: 254
Joined: 4/3/2007
Status: offline

I've tried one, but I hated it. it was just uncomfortable. It may work as as humilation... could be a good punishment for a pain slut like me.

(in reply to subboi3382)

RE: Fucking Machines - 5/30/2009 7:22:15 PM

Posts: 164
Joined: 2/14/2006
Status: offline

I have a machine, and it's definitely nice...

I haven't gotten a chance to use it on anyone other than myself yet, but, it's a fun little toy. =)

¤¤¤¤¤¤¤

_____________________________

Power = Work / Time
Knowledge is Power and Time is Money, so
Knowledge = Work / Money, and Money = Work / Knowledge
Therefore, as Knowledge approaches zero, Money approaches infinity (regardless of work done), and vice versa.

(in reply to onlyfreelycaged)

RE: Fucking Machines - 5/30/2009 7:32:14 PM

BKSir

Posts: 4037
Joined: 4/8/2008
From: Salt Lake City, UT
Status: offline

Oh, LOL. THOSE fucking machines. I thought it was about computers, as that's what I call mine more often than not... "Fucking machine!"

_____________________________

We'll begin with a spin, traveling in a world of my creation. What we'll see will defy explanation.

I am the voices in your head.

BiggKatt Studios

(in reply to Fnordstrum)

RE: Fucking Machines - 5/30/2009 8:31:59 PM

Posts: 23
Joined: 3/23/2008
Status: offline

Well, I think there are some that are operated by computers, are they not? There is one that is terribly expensive, but can be operated by computers found at: http://www.extremerestraints.com/fucking-machines_48/the-shockspot-robotic-fucking-machine_2630.html The computer functionality does add many more options for the user, although I cannot really understand how fast they operate since they are measured in strokes per minute.

(in reply to BKSir)

RE: Fucking Machines - 6/10/2009 6:10:34 PM

Posts: 58
Joined: 4/26/2004
Status: offline

what kind of machine to you have Fnordstrom?

(in reply to Fnordstrum)

RE: Fucking Machines - 6/10/2009 8:34:04 PM

Posts: 164
Joined: 2/14/2006
Status: offline

I have one of those toolbox machines... as in, the motor is inside of the toolbox, and the shaft with the dildo attached comes out of the side of it... You can adjust the stroke depth to either 2, 4, or 6 inches, and it has a knob for controlling the speed.... However, I would say it could use a stronger motor. (At some point I might look into getting a better motor and replacing it, but probably not for a while)

But, despite having a not particularly strong motor, it's still nice, heh.

¤¤¤¤¤¤¤

_____________________________

Power = Work / Time
Knowledge is Power and Time is Money, so
Knowledge = Work / Money, and Money = Work / Knowledge
Therefore, as Knowledge approaches zero, Money approaches infinity (regardless of work done), and vice versa.

(in reply to chrisea623)

RE: Fucking Machines - 6/10/2009 9:47:04 PM

Posts: 64
Joined: 4/26/2007
Status: offline

While my experience in this area is limited, i have to advise that you avoid \the "starfucker" line. You cant miss it, looks like a plastic volley ball with a handle. Poor thing burnt out after only a few uses.

I myself have been curious about the more hardily constructed machines, and even tempted in testing my mechanical knowledge to make my own.

(in reply to Fnordstrum)

RE: Fucking Machines - 6/11/2009 3:56:40 PM

Posts: 857
Joined: 6/4/2008
Status: offline

quote:

ORIGINAL: BKSir

Oh, LOL. THOSE fucking machines. I thought it was about computers, as that's what I call mine more often than not... "Fucking machine!"

my old computer was a masochist. it would foul up till i hissed the magic word at it, and then it would run smoothly for months.

oh, the magic word? "ka...ta...na..." straightened it up immediately, except for once.

then i had to pull out the other magic word. "sledge...ham...mer".

kitten

(in reply to BKSir)

RE: Fucking Machines - 6/15/2009 2:13:25 AM

Posts: 59
Joined: 12/28/2006
Status: offline

I have used fucking machines on male submissive during play session on a number of occassions. I had a fucking machine made for me by a friend for about $550 dollars, it starts out moving slow and then gets faster after a few minutes. The flogging bench I strap them onto was made by this same friend for a cost of around $1300.00. It enables me to secure their wrists, ankles and waist. The outfit that I like to wear when I use this equipment is a combination of custom made leather and latex items and the total cost was well over $2500.00 including the boots. Even if I do say so myself, I look hot in this outfit. Very HOT!!!! The look on my submissives face when he is tightly secured on the bench, the tip of the fucking machine is placed against his little sissyhole and I turn it on, then I inform him I'm going out and will be back in a couple of hours, well that is $$$ priceless!!!!!

(in reply to goten11756)

RE: Fucking Machines - 6/15/2009 11:44:16 AM

Posts: 164
Joined: 2/14/2006
Status: offline

quote:

ORIGINAL: Imakemensquirm

I have used fucking machines on male submissive during play session on a number of occassions. I had a fucking machine made for me by a friend for about $550 dollars, it starts out moving slow and then gets faster after a few minutes. The flogging bench I strap them onto was made by this same friend for a cost of around $1300.00. It enables me to secure their wrists, ankles and waist. The outfit that I like to wear when I use this equipment is a combination of custom made leather and latex items and the total cost was well over $2500.00 including the boots. Even if I do say so myself, I look hot in this outfit. Very HOT!!!! The look on my submissives face when he is tightly secured on the bench, the tip of the fucking machine is placed against his little sissyhole and I turn it on, then I inform him I'm going out and will be back in a couple of hours, well that is $$$ priceless!!!!!

Man, that sounds awesome.

¤¤¤¤¤¤¤

_____________________________

Power = Work / Time
Knowledge is Power and Time is Money, so
Knowledge = Work / Money, and Money = Work / Knowledge
Therefore, as Knowledge approaches zero, Money approaches infinity (regardless of work done), and vice versa.

(in reply to Imakemensquirm)

RE: Fucking Machines - 6/17/2009 7:18:41 AM

Posts: 222
Joined: 11/27/2005
Status: offline

I made a fucking chair a few years back it is fun. Especially when the probe attached is an estim probe hooked up to a tens unit. How ever , the computer control of mine is very low level. it is either off half speed , or full speed , with 3 or 4 levels of tens control. But it works nicely for my needs.
The one mentioned in the link above "the shock spot" is a nice looking machine. It appears they used a linear motor on it, and those are extremelly pricey. i bought an el cheapo linear motor a year or 2 ago and havent had the time to make another fucking device out of it yet.

You will find adding an estim probe to an anal machine is extremely interesting and can be very punishing lol

_____________________________

Some of the toys I have made can be seen at
http://www.slavechris.net

(in reply to Fnordstrum)

RE: Fucking Machines - 6/20/2009 11:25:07 PM

Posts: 5
Joined: 8/5/2008
Status: offline

This is a topic I will watch closely. I went to school for mechanical engineering and really want to build one just to say I did. Looking to get the rest of my machinery first so I can work with the materials needed to build a quality one. If it turns out well I may put them up on here if people would be interested.

B

(in reply to Irishm57)

RE: Fucking Machines - 6/30/2009 10:26:13 PM

MsRosemarie1369

Posts: 10
Joined: 4/12/2008
Status: offline

I have used a sybian, and they are really nice, but very spendy. When I used it one someone else, I would wait until just before they orgasm, then turn it off until they calmed down, then start again.

(in reply to darkprinceb13)

RE: Fucking Machines - 2/14/2010 7:55:39 PM

Posts: 3
Joined: 1/9/2010
Status: offline

My Master built a fucking machine, it is powered by a bosch hammer drill (has lots of speed settings) but you could use a cheaper one. The drill drives a wheel that has attachment points to give the strokes from 2 to 12 inch's to a sliding bar, at the other end of the sliding bar, he can attach an arrange of dildos, vibrators and butt plugs. In the process of moving so can't show picture as most of Masters toy's are packed away and wont be opened till the move has taken place

(in reply to MsRosemarie1369)

RE: Fucking Machines - 2/25/2010 2:51:36 PM

Posts: 32
Joined: 5/15/2004
Status: offline

But I AM a fucking machine... :)

(in reply to jaytheslave)

RE: Fucking Machines - 5/6/2010 6:59:08 AM

Posts: 79
Joined: 4/8/2010
Status: offline

I have a "The Star Machine" & I like it, I use vac-u-lock attachments with it.

(in reply to Fnordstrum)

Page: [1] 2 next > >>

All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> Fucking Machines

Page: [1] 2 next > >>

Jump to:

New Messages	No New Messages
Hot Topic w/ New Messages	Hot Topic w/o New Messages
Locked w/ New Messages	Locked w/o New Messages

Post New Thread

Reply to Message

Post New Poll

Submit Vote

Delete My Own Post

Delete My Own Thread

Rate Posts

Collarchat.com © 2024

Terms of Service

0.621