JudasButcher
Posts: 43
Joined: 1/5/2007
Status: offline
|
I made the most amazing vibe toy a few months ago and thought I would share the idea. I got one of those long handled "back massagers" from the drug store, and disassembled it from it's body. The entire head will come off, just leaving the round steel top of the part that the motor spins. I glued a small semi-hard plastic buttplug to that, and attached it to a frame made from pvc pipe. The wiring goes through the pipe and is attached to the side of the pipe standing up. It has 2 speeds, but low always manages to do the trick. Imagine the power of one of those massagers concentrated to a 1/2 inch tip of the plug.....oh yea...she's got a serious love/hate relationship with this thing.
The base is made from 1 1/4 pvc. You'll need 4 legs approx. 1 foot long. Attach 2 each to a tee fitting, with the center of the tee facing in towards each other. Cut 2 more pieces approx. 6 inches long, put another tee in the center facing up, and attach the leg assemblies to either side. You'll have to measure the upright coming from the last tee so it fits your sub, then simply attach. DO NOT GLUE the 3rd tee in place. With being able to move and turn, you can use this gem while standing, or, my personal favorite, while she is tied to the Y chair by simply pushing it down. I used another 2 pieces of the pvc to make more uprights, which simply hold dildo's or other toys.
The "massager" was $15, the 10feet of pvc roughly $10, and the fittings around $1.50 each. (mine was free lol the joys of being a pipefitter) I'll have to make sure I have pics of it up in my profile pictures...happy building!
|
Thunderstick - 
Profile
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread