Hippiekinkster
Posts: 5512
Joined: 11/20/2007 From: Liechtenstein Status: offline
|
Wilbur's idea is not bad, but I'd expand on it... put the cupcake in upside down. With the right cup, there will be a space between the glaze and the cup bottom. If the cupcake goes in too far, trim the cups so that the edge is right where the bottom of the cupcake is. Wrap it in plastic wrap. This should keep the cupcake from moving. Find a shipping tube that is the same diameter as the widest part of the cup. Carefully put the first one in, so that the bottom of the cupcake and wide end of the cup are at the opening of the tube. Put the metal endcap on that end of the tube. Cut some cardboard circles the same size as the interior diameter as the tube. Use those as spacers, so the bottom of the plastic cup doesn't get rammed into the cupcake bottom above it. Do that until the tube is filled; just use some crumpled newspaper or something as a spacer, if not. Put the other endcap on. You might want to tape them on. Now, take the tubes and pack them in the appropriate-sized box, wrapped in bubble wrap or whatever, just keep the tubes immobile in the center of the box. The above should immobilize the cupcakes inside the tube, protect them from movement, and keep them protected in case the box gets a little smushed.
< Message edited by Hippiekinkster -- 12/12/2011 6:59:24 PM >
_____________________________
"We are convinced that freedom w/o Socialism is privilege and injustice, and that Socialism w/o freedom is slavery and brutality." Bakunin “Nothing we do, however virtuous, can be accomplished alone; therefore we are saved by love.” Reinhold Ne
|