cb 6000 (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel



Message

thewood -> cb 6000 (5/6/2012 2:13:43 PM)

i have a nrw cb 6000, i want to practice with it before i find a lady ketyholder. whats the best site for showing me how to get it on?



amaidiamond -> RE: cb 6000 (5/6/2012 2:24:52 PM)

dunno but maybe google it?



Soyokaze -> RE: cb 6000 (5/6/2012 4:25:16 PM)

I never really took a close look at the thing, but isn't it just put a ring around your all your bits then put long bit in tube lock tube to ring? If you don't know how to put your bits through a ring the best way I've found is to pull your skin through then push your bits through then your long bit through. I'm doing a lot of guessing here though.



mummyman321 -> RE: cb 6000 (5/6/2012 6:18:09 PM)

Here is a crazy idea. Go to the CB6000 website and read the instructions. There is even an animated video. Just a thought.



thewood -> RE: cb 6000 (5/6/2012 7:32:05 PM)

ty but any video ive seen only shows putting it together, without the cock n balls being involved



thewood -> RE: cb 6000 (5/6/2012 7:51:41 PM)

i learned something the plastic piece on the spacer needs to come off, but its difficult to take off



Didahoe -> RE: cb 6000 (5/6/2012 9:32:37 PM)

The way I found to put it on is put the c*** ring on. push your penis into the extra foreskin and put the sleeves on.. the skin will roll in it. your welcome



MikeBekoff -> RE: cb 6000 (6/14/2012 8:39:55 AM)

thewood: If you are still learning how to use your CB6000 chastity device, I would recommend that you visit the Chastity Forums website, which provides information and discussion about the Male Chastity lifestyle, the role of keyholders, and advice on various styles and manufacturers of chastity belts and devices. You can find Chastity Forums as follows: http://chastityforums.com/index.php You will find them to be an invaluable resource to assist you in beginning your Male Chastity journey.



jj292 -> RE: cb 6000 (6/16/2012 3:38:17 PM)

The "sock method" is a very easy and quick way to get it on.

There are various websites and forums that can explain how to do it.



Autopilot98 -> RE: cb 6000 (8/12/2012 7:16:33 PM)

I own one. And use it on every boi that I play with. Find the ring that fits snug enough to cause an erection, then select the next larger one. Put it on and assemble the peg parts together. Watch out for your hair if you have any. Now, lube the snot out of the cage part. Liquid, not jelly and make sure you are completely soft. If you have some thin string, tie a slip not and wrap it around the glans. Feed the end through the piss slot and pull your cock inside. Make sure you are using the shortest spacer and lock pin possible. Lock the padlock and then use a Q-Tip to slip the string off your head. If you don't have the string, or can't figure out the knot or how to get it off, carefully use a Q-Tip through the openings to push your cock inside. Be careful though. Pinch, pinch, pinch as you remove the Q-Tip.

I actually have 2 of these. I insist on knowing how to use any toys and aids I have. That means using them on myself first. If you have any substantial girth, toss it. I split the seam on mine and, well, you know what happened. Get a steel one. Stainless, not chrome plated. Trust me. They're worth the cost over a sliced and pinched tool.



Page: [1]

Valid CSS!




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy
0.03125