mnottertail -> RE: OK to tie me tight... (1/11/2014 6:23:32 AM)
|
Well, all one needs to do is inspect them when they are open, those teeth on the hinged part that completes the circle we will call pawls, now look inside the place where they fit in. That we will call the rachet, take a dowel or a screwdriver and press on it, you will see it is spring loaded, so when the high part of the teeth go accross it it makes room, and then springs up to fill the 'valleys' and mesh the teeth, so we simply need to introduce a thin 'key' and depress the pawl and with a like action from the other side, back it out. Just look at the fuckin thing guys, handcuffs are simple. look at a handcuff key; simple...it has a little bobby spring pin in the lock and you just need to click it to one side, a bobby pin works...the mechanism is not like a doorlock with pins in it, it is a click clack (hard to explain) , but it takes a great deal of practice to get the feel for it and get it open same time, and real fuckin hard to do behind your back, whereas the slip and slide can be done by an earthworm with only minimal practice, but you need better tools to do it. Oh, and for those of you contemplating this scenario and making the pick out of the wiperblade metal, don't try to hide it in your ass or something or say I said to do it, this is not as serious as going to Chino or Attica.
|
|
|
|