MrDom
Posts: 36
Joined: 1/8/2004 From: Tampa Bay, FL Status: offline
|
I have not seen what you want. But it is not that hard to make it yourself if you somewhat handy. All you need is a buttplug (pick your size, shape), length of thin flexible plastic tubing (Home Depot/Lowe's), 2 end caps to fit that tube and some plastic cement. Also some crayola modeling foam and latex mold making compound (your local plastics supply store) would be handy. Glue one endcap onto the hose and let it try. Now stuff the crayola modeling foam (or any other brand, craft supply store) into the hose so you can mold the hose to the right shape for your cat tail. After that is done, put on the other endcap to seal the host. Let it dry. Now mix the latex modl making compound with some black dye made for this kind of compound and paint it liberaly over your at tail tube (yup, like liquid latex but way cheaper) Let it dry. Finally attach the tail to your buttplug. There are several options here like using plastic cement. I haven't tried this but I wonder if one can use a drywall molly. Drill/burn a hole in teh bottom of teh butt plug, coat it with plastic cement and insert the molly. Wiat until dry. Now in the previous step, before putting on the last endcap. insert a compatible screw into it so it sticks out. make sure you glue it in. This way you should be able to screw on/off your tail from the plug, allowing you to connect other tails/accesories. I hope this helps and wish you much joy, both manufacturing and using your tail (a picture of you wearing it would be a nice thank you)
_____________________________
Dominic (http://www.geocities.com/masterdom01) Domination is more than a black shirt, a crop and having read a Gor novel.
|