nipple extender

nipple extender (Full Version)

All Forums >> [The Marketplace] >> Sought or For Sale

Message

Everettsj -> nipple extender (1/18/2007 6:57:34 AM)
Good morning everyone, i am looking to purchase nipple extenders for pierced nipples, i did have a website that sold them, but sadly it is no longer around. The extenders are meant to stretch the nipple anywhere from 1/2 to 1 inch. If anyone could point me in the right direction i would be grateful. Many thanks Everetts j

stef -> RE: nipple extender (1/18/2007 8:39:56 AM)
You might want to try googling "nipple stretcher" and see what comes up. Kitten's Toy Room was on the first page of results. ~stef

Everettsj -> RE: nipple extender (1/18/2007 12:49:27 PM)
Thank you ever so much, this was the link i lost, and boy am i glad you were able to direct me to it again. Everetts j

punkkin -> RE: nipple extender (1/19/2007 6:57:07 PM)
hello ,here is what you are looing for ---www.chaoticcreations.com perfect nipple stretcher

Badkitty0810 -> RE: nipple extender (1/19/2007 7:12:20 PM)
That link didn't work. I think you meant this one: http://www.bondagecollars.com/stretch.htm

lips4pleasure -> RE: nipple extender (1/24/2007 11:06:28 AM)
You might also like these. https://x-vids.com/ssl/madshop/en/

donsmith355 -> RE: nipple extender (1/27/2007 10:21:34 PM)
hi nice to meet u

ssinskin2000 -> RE: nipple extender (1/29/2007 5:43:06 PM)
a good site is pierceoff.com.au They lots of piercing stuff and a pair of wind out nipple stretchers. they take a bit of messing around to get them on but once they are on you can wind out your nipples to an inch

KinkyyetKind -> RE: nipple extender (2/6/2007 9:49:20 PM)
Really depends on whether you want something purely functional, or functional and pretty [more jewelry like]. If all you need is function you can make them up at home using wire and a pair of pliers. I've made some out of 12ga copper wire that were very functional and quite attractive. Cost was nothing but 30min of time and some scrap wire from the garage. The nice screw adjustable stretchers I've seen made of silver have been $100 and up. I've knocked off the design using copper wire and brass fittings [nuts/ screws] for <$5 in materials, just took a couple of hours to fabricate. One thing to remember is that you should already have a fairly heavy gauge [think 14ga] bar through your nipples to avoid problems with pull through/ splitting. 16ga can work but that's the absolute smallest, and you have to stretch slower.

Page: [1]

Collarchat.com © 2026

Terms of Service

0.046875