pixelslave
Posts: 1444
Joined: 8/19/2006 Status: offline
|
quote:
ORIGINAL: fairdom23 im wondering if one can make their own. figure the sawzall costs 20$ max with taxes. average dildo costs 10-20$, so you have a fuckSall toy for a little more than 40$ once the dildo is attached to the tool. im sure it could be possible to rig it to have the dildo permenantly attached or have each dildo/attachment on a rod that will fit into the original tool. that way you still have the tool and can use it for "fun" as well. Having been a Mechanical Engineer in what seems now like a former life, do you know what a four-bar mechanism is? If not, look it up in a reference book; preferably an engineering one on kinematics. You could use one to control the depth of penetration as well as to dampen things between the sawzall and the dildo end of things. That would make everything a LOT safer and you wouldn't have to worry about attaching the dildo directly to the sawzall via a blade. One could mount the dildo to a plate (expoxy comes to mind, especially for one with either balls, a suction device at the base, or one with a generally large diameter base) that attached to a point on the four-bar mechanism, thus giving the option to try different dildos & ones made of different materials without having a meager/thin blade with teeth attached to it that might break the dildo, break the blade, heat-up or cut through the dildo causing injury to the "fuckee". With such a four-bar mechanism, I can readily envision how one could configure it to shorten or lengthen the stroke of the dildo. One could also add dampening via a small shock absorber, change the motion from linear to slightly ovular, and do a variety of other things that come to mind. For reference, a typical front suspension on a car is usually a four-bar mechanism as are many other link-type mechanisms that you commonly run into on various machines in today's world. I think you'd also want the mechanism to attach directly to the sawzall (or vice versa) for both convenience and portability. Otherwise it would likely turn into a bench type of thing; losing some of it's portabilty and flexibility of application. - pixel Collared to Majik
< Message edited by pixelslave -- 8/22/2007 9:45:37 AM >
_____________________________
Chivalry isn't dead! It's for those who have it in their hearts & are willing to be taught. It's a way of life, a code of honor; this one's armor still needs some polishing!
|