Collarspace Discussion Forums


Home  Login 

Looking for someone with machine shop skills


View related threads: (in this forum | in all forums)

Logged in as: Guest
 
All Forums >> [The Marketplace] >> Sought or For Sale >> Looking for someone with machine shop skills Page: [1] 2   next >   >>
Login
Message << Older Topic   Newer Topic >>
Looking for someone with machine shop skills - 5/7/2008 9:14:42 AM   
MasterJoe50


Posts: 41
Status: offline 		Anyone that has spent any time on these pages, has no doubt seen the advertising banners at the bottom of the pages, showing bondage and torture devices. One device shown, that can no longer even be seen, except in museums, and books, is a device called 'The Pear'. An old torture device that was real and actually used back in the midevil times.

I'm looking for someone with access to, and the knowledge to duplicate and manufacture this device, of course without the 'spikes' on the end, that when originally used did cause serious physical damage to it's 'victim', that lead to eventual death.

Looking at this device, (without the spikes), I can see it as a great useful dilator for lifestyle activities! I don't know why anyone, or company hasn't thought of reproducing this device for lifestyle activities, but I would tend to bet, that if these became available, sales would really be good! It's really not much more than a very elaborate, adjustable speculum, or dilator...

There are enough detailed pictures, references to, and possibly patent drawings on the internet for someone with some machines shop skills to reproduce this device.

I'm looking for such a person, and to have one of these devices reproduced, again, 'without' the spikes!

Anyone that believes that can duplicate this device can reach me through CM. If you can capable of mass producing these, I can put you in touch with a worldwide distributor of lifestyle 'toys', that purchases a product line from me that I manufacture. It's a great company that I've had a relationship for 10 years now, and I'm sure they would be interested in purchasing these to add to their product line!

[Mod Note:  email address removed]


< Message edited by ModeratorEleven -- 5/7/2008 9:34:42 AM >

_____________________________

----
Watch the real truth about 9/11!

http://video.google.com/videoplay?docid=7866929448192753501
Profile   Post #: 1
RE: Looking for someone with machine shop skills - 5/7/2008 10:28:07 AM   
s661055


Posts: 114
Joined: 11/15/2004
From: Denmark/Austria
Status: offline 		http://www.s-art.com/shopcom/index1.html

under gags, i think you will be surprised

(in reply to MasterJoe50)
Profile   Post #: 2
RE: Looking for someone with machine shop skills - 5/8/2008 5:47:05 AM   
mistresszariah1


Posts: 145
Joined: 11/5/2005
Status: offline 		I own a tool and die shop and make many fun toys there My sadistic Mistress line

_____________________________

Mistress Zariah

(in reply to s661055)
Profile   Post #: 3
RE: Looking for someone with machine shop skills - 5/8/2008 7:38:29 PM   
ThinkingKitten


Posts: 447
Joined: 6/15/2006
From: Ontari-ari-o
Status: offline 		That website has the worst spelling I've seen for an online store front in a looooooonnnnggg time.

The Heretic's Pear. Downright nasty. Used for homosexuals, heretics and female adulterers, in various "crime appropriate" applications.

_____________________________

Thinking Kitten

If you can't stand the heat... tell the chef to get out of the kitchen.

(in reply to s661055)
Profile   Post #: 4
RE: Looking for someone with machine shop skills - 5/11/2008 7:49:49 AM   
s661055


Posts: 114
Joined: 11/15/2004
From: Denmark/Austria
Status: offline 		i think the spelling is just a biproduct from a bad translation from the german site..

(in reply to ThinkingKitten)
Profile   Post #: 5
RE: Looking for someone with machine shop skills - 5/12/2008 8:34:58 AM   
MasterJoe50


Posts: 41
Status: offline 		Took a look at the web site you listed. Am surprised a bit.. Leave it to the Germans! I think they are a bit more 'hard core' BDSM than we are in this country. Kind-of known that from seeing some BDSM hard core films years ago made in Germany.

They appear to be of similar design, and I certainly wouldn't mind having on in my hand to look closer at the two they had listed. One of the images wouldn't enlarge, but from looking at the other close up, it would appear that you would need two adjustable wrenches to operate these... There wasn't too much information about the size of these, other than the opening width.

Again, actually having one in hand would really tell if these would operate as well as the original 'Pear'. Especially if going to be used vaginally or anally, where there would be more pressure on the blades.

With our American dollar not being worth much these days, I would hate to even look up the exchange rate to see the actual cost of these in U.S. dollars, not to mention overseas shipping, and for something that 'might not' work properly for other intended uses.

Still interesting though and appreciate the link. Since we seem to be several years behind the overseas market, I'm sure that it would be that long for one of our bigger 'toy' distributors to bring this in and offer it domestically.

I do have some connections though, and will see if I can speed up that process.

_____________________________

----
Watch the real truth about 9/11!

http://video.google.com/videoplay?docid=7866929448192753501

(in reply to s661055)
Profile   Post #: 6
RE: Looking for someone with machine shop skills - 5/12/2008 8:38:24 AM   
MasterJoe50


Posts: 41
Status: offline 		To mistresszariah1's post:

You stated that you own a tool and die shop. Have you ever taken a close look at the Pear, and throught of reproducing it?

_____________________________

----
Watch the real truth about 9/11!

http://video.google.com/videoplay?docid=7866929448192753501

(in reply to mistresszariah1)
Profile   Post #: 7
RE: Looking for someone with machine shop skills - 5/12/2008 8:47:12 AM   
MasterJoe50


Posts: 41
Status: offline 		In reply to ThinkingKitten...

What caused these to be 'nasty' were the spikes or pointed tips on the end of the blades. They 'were meant' to eventually cause a slow painful death to it's victim.

However, they don't need to be 'nasty' in today's world. Without the spikes or sharp pointed tips on the ends of the blades, they really wouldn't consist of much more than an 'elaborate dilator'.

With more and more people getting into dilation and fisting these days, (as seen in those 'Interest Lists'), I'm sure these would be in a lot of people's 'toybox', if they were available.

Might not be 'your cup of tea', but I do see a good potential market for these...

_____________________________

----
Watch the real truth about 9/11!

http://video.google.com/videoplay?docid=7866929448192753501

(in reply to ThinkingKitten)
Profile   Post #: 8
RE: Looking for someone with machine shop skills - 5/14/2008 12:34:14 AM   
Aristaios


Posts: 2
Joined: 10/13/2007
Status: offline 		The device itself would be easy enough for me to make.  The difficult part is making it so that as you retract it, it does not 'pinch'.  This is probably the reason that you cannot find these on the market....... but if you have any ideas about taking care of that problem, I would be glad to look at it.

(in reply to MasterJoe50)
Profile   Post #: 9
RE: Looking for someone with machine shop skills - 5/14/2008 12:44:55 AM   
TheGorenSociety


Posts: 116
Joined: 2/13/2005
Status: offline 		The reason why you do not see them is a liability issue I made two back in the 80's and never could get anyone interested in them due to thier liability.

(in reply to Aristaios)
Profile   Post #: 10
RE: Looking for someone with machine shop skills - 5/14/2008 8:56:10 PM   
Leatherist


Posts: 5149
Joined: 12/11/2007
Status: offline 		Nodding..... too dangerous to produce-you would get your ass sued off when it injured someone. I'd avoid it, for the same reasons I would not make a pipe bomb and sell it.

_____________________________

My shop is currently segueing into production mode.

I'm not taking custom orders.

(in reply to TheGorenSociety)
Profile   Post #: 11
RE: Looking for someone with machine shop skills - 5/16/2008 2:03:10 AM   
Aristaios


Posts: 2
Joined: 10/13/2007
Status: offline 		Well, if you were to make the pipe bomb "Just for display"....... lol

(in reply to Leatherist)
Profile   Post #: 12
RE: Looking for someone with machine shop skills - 5/16/2008 2:08:36 AM   
TheGorenSociety


Posts: 116
Joined: 2/13/2005
Status: offline 		I have made reproductions items for display and sets over the years and even that has a lot of risk liability wise.

(in reply to Aristaios)
Profile   Post #: 13
RE: Looking for someone with machine shop skills - 5/16/2008 9:53:25 AM   
SimplyMichael


Posts: 7229
Joined: 1/7/2007
Status: offline 		To extract it, why not use an inflatable buttplug inside it?

(in reply to TheGorenSociety)
Profile   Post #: 14
RE: Looking for someone with machine shop skills - 5/16/2008 9:15:53 PM   
irrumatrix


Posts: 2
Joined: 7/6/2007
Status: offline 		I remember seeing one used in an insex video that I believe had something about a pear in the title, so I'm sure you could just call up PD and ask to borrow his.

(in reply to SimplyMichael)
Profile   Post #: 15
RE: Looking for someone with machine shop skills - 5/17/2008 4:12:23 AM   
Hollangrad


Posts: 35
Joined: 12/17/2007
From: Indiana
Status: offline 		On the issue of "Pinching," What if you were to give the device more of a curved inlay amongst the seam?  This would limit the amount that the flesh would sit apon the areas of risk when it is retracted.




_____________________________

Don't Emulate without due cause, Don't Subjagate without the right head wearing the crown, Never Procreate without an idea of what is to come & above all, to thine own self be true.
-Dr. Killjoy

(in reply to irrumatrix)
Profile   Post #: 16
RE: Looking for someone with machine shop skills - 5/21/2008 6:13:40 PM   
mistresszariah1


Posts: 145
Joined: 11/5/2005
Status: offline 		What is a pear? will you email Me info plse thks, I can reverse engineer anything


< Message edited by mistresszariah1 -- 5/21/2008 6:14:29 PM >

_____________________________

Mistress Zariah

(in reply to Hollangrad)
Profile   Post #: 17
RE: Looking for someone with machine shop skills - 5/22/2008 1:59:52 PM   
Jester0587


Posts: 45
Joined: 12/22/2007
Status: offline 		It seems fairly simple.  My idea is to double wrap the "leaves" as it were in leather.  A bit more difficult to clean but even if there is pinching at least it won't be rediculously painful, at least no more painful then having yourself stretched out around it.

(in reply to Hollangrad)
Profile   Post #: 18
RE: Looking for someone with machine shop skills - 5/23/2008 12:12:02 AM   
Leatherist


Posts: 5149
Joined: 12/11/2007
Status: offline 		It's much easier to just do this with an inflatable plug. People spend way too much time worrying over the details of something origionally intended to maim.

_____________________________

My shop is currently segueing into production mode.

I'm not taking custom orders.

(in reply to Jester0587)
Profile   Post #: 19
RE: Looking for someone with machine shop skills - 5/26/2008 7:44:51 PM   
Lynnxz


Posts: 4813
Joined: 10/3/2006
From: Atlanta
Status: offline 		I asked about the pear just for you. Aren't I sweet? Hahaha, jk, but here it is.


http://www.insextoystore.com/catalog.htm. It's towards the bottom

_____________________________

HBIC



(in reply to Leatherist)
Profile   Post #: 20
Page:   [1] 2   next >   >>
All Forums >> [The Marketplace] >> Sought or For Sale >> Looking for someone with machine shop skills Page: [1] 2   next >   >>
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Collarspace.com — BDSM Community & Personals  •  Browse BDSM Profiles  •  Female Dominants  •  FemDom Dating  •  Foot Worship  •  Bondage Community  •  BDSM Glossary  •  Join Free

Collarchat.com © 2026
Terms of Service Privacy Policy Spam Policy

0.078